Eye Shadow and Blush (Powder) Production Line and Factory Setup

A eye shadow and blush (powder) production line is a complete industrial system designed to produce high-quality eye shadow and blush (powder) under controlled hygienic and process conditions. The line is engineered for consistent product quality, operational reliability and compliance with cosmetic industry standards.

From an industrial perspective, eye shadow and blush (powder) manufacturing combines precise mixing, dispersion or emulsion technology and packaging systems to achieve the required texture, stability and performance. The process relies on a defined sequence of unit operations that must be correctly engineered, sized and integrated.

The Industrial Department supports investors who want to establish a new eye shadow and blush (powder) factory as well as existing plant owners who need repair, overhaul, capacity expansion or automation of their current lines. Projects can start from an empty site or from an operating facility that requires technical upgrading.

Whether the goal is a green-field turnkey plant in Iraq, Kurdistan Region, Afghanistan or other regional markets, or the modernization of an existing line in Iran, engineering, machinery supply or manufacturing, installation, commissioning and ongoing technical support can be provided under defined contractual scopes.

Production Line Overview

The eye shadow and blush (powder) production line is engineered as an integrated process system covering preparation, main process stages, filling and packaging. Design capacity is determined during the engineering phase and can typically range according to market requirements and selected equipment sizing.

Main process flow: Raw material preparation → Powder mixing → Compaction in molds → Drying → Packaging

Main machinery groups: Powder mixer with stainless-steel blades and variable speed, micronizing mill, hydraulic press for powder compaction, dryer, packaging machine. Supporting infrastructure covers electrical power, process water, steam, compressed air and wastewater handling where applicable.

Manpower requirements depend on the degree of automation. Quality control covers incoming raw materials, process parameters and finished-product specifications.

Technical Specifications

The following technical data represent typical ranges for an industrial eye shadow and blush (powder) production line. Final values are defined during basic and detailed engineering and may vary according to selected technology, level of automation, product portfolio and factory layout. For precise project-specific figures, contact the Industrial Department.

Specification	Description
Product	Eye Shadow and Blush (Powder)
Production Capacity	Depending on project capacity and selected equipment sizing (to be determined during engineering phase)
Required Area	Subject to final layout and capacity
Electrical Power	380 V three-phase (depending on equipment selection and automation level)
Main Machines	Powder mixer with stainless-steel blades and variable speed, micronizing mill, hydraulic press for powder compaction, dryer, packaging machine
Utilities	Required area 100-300 m². Power 10-30 kW. Compressed air 6 bar. Manpower 3-8 per shift. Press capacity 500-1000 pieces/hour.

All figures are indicative. Detailed utility balances, equipment lists and layout drawings are prepared after process definition and capacity confirmation.

Products

An industrial eye shadow and blush (powder) production line can manufacture a variety of finished products depending on the selected formulation, process technology and packaging system. Variant development is defined during product development and process engineering. Packaging formats are selected according to target markets and distribution channels.

Raw Materials for Eye Shadow and Blush (Powder) Factory

Raw material selection and quality control are critical for product quality, stability and performance. The main materials used are: Talc, mica, pigments, binders, silicone, preservatives, oils, water, packaging materials, pans

Each material has a defined role and a measurable impact on quality attributes. Storage and handling conditions must be controlled to preserve functional properties.

Sahi Rasa For Factories raw material

The Supply Chain Department is prepared to support identification, evaluation and supply of the main and auxiliary raw materials required by eye shadow and blush (powder) factories. Depending on the contractual scope, services may include supplier identification and evaluation, procurement and purchase coordination, specification control, logistics coordination, supply-chain design for continuous production, ongoing supply arrangements, and supply of materials from Iran for projects located in regional markets.

Registering an order for raw materials for the factory Eye Shadow and Blush (Powder)
Sahi Rasa Supply Chain Department

Raw-material supply chain support can be examined for industrial projects located in Iran, Iraq, the Kurdistan Region of Iraq (including Erbil, Sulaymaniyah, Duhok), Baghdad, Basra, Mosul, Afghanistan (Kabul, Herat, Mazar-e-Sharif), Uzbekistan, Turkmenistan, Tajikistan, Syria, Oman, Jordan, Turkey, Armenia and Georgia.

Manufacturing Process

The process begins with accurate weighing and preparation of raw materials including talc, mica, pigments, binders, silicone and preservatives. Powders are thoroughly mixed in a variable-speed stainless-steel mixer. After mixing the blend is compacted in molds using a hydraulic press with adjustable pressure. Compacts are dried to remove residual moisture and then packaged into pans or compacts.

The overall process follows the sequence: Raw material preparation → Powder mixing → Compaction in molds → Drying → Packaging

Each stage has a clear purpose, input materials, equipment and quality impact. Detailed process parameters are defined during the engineering phase according to product formulation and capacity.

Machinery & Equipment

Each main machine performs a specific function. Support is available for design, manufacturing or procurement, customization, installation, commissioning, repair, overhaul, refurbishment, automation and spare-parts supply according to the agreed project scope.

Main equipment includes: Powder mixer with stainless-steel blades and variable speed, micronizing mill, hydraulic press for powder compaction, dryer, packaging machine.

For every main machine the following aspects are covered: Function, Working Principle, Position in line, Importance, Product Quality Impact, Maintenance needs, and Sahi Rasa Support (Design, Manufacturing, Procurement, Installation, Commissioning, Repair, Overhaul, Refurbishment, Automation, Spare Parts).

Factory Layout & Building Requirements

Typical functional areas include raw-material receiving and storage, main process areas, filling and packaging, quality-control laboratory, utility rooms, maintenance workshop, staff facilities, loading docks and administrative offices. Layout must respect hygienic zoning and process flow. Exact area allocation is determined during the engineering phase according to capacity and product range.

Utilities

Required area 100-300 m². Power 10-30 kW. Compressed air 6 bar. Manpower 3-8 per shift. Press capacity 500-1000 pieces/hour.

Electricity: 380 V three-phase
Process water, steam, compressed air as required
HVAC and drainage according to hygiene and local regulations

Turnkey Factory Setup

An investor can start from an empty site. Depending on contractual scope, the project can be accompanied through: Idea → Feasibility → Engineering → Factory Design → Machinery → Procurement → Manufacturing → Installation → Commissioning → Training → Raw Material Supply → Packaging → Trial Production → Commercial Production. The objective is an operational factory ready for production.

EPC & PMC

Projects can be executed under EPC (Engineering, Procurement, Construction) or PMC (Project Management Consultancy) approaches. Engineering, machinery supply or manufacturing, installation supervision and commissioning are coordinated within the defined contract boundaries.

Machinery Repair

Existing factories can request inspection, troubleshooting, mechanical and electrical repair, component replacement, spare-parts supply and line maintenance support for the main process equipment.

Machinery Overhaul & Refurbishment

Older equipment can be evaluated for comprehensive overhaul, replacement of worn parts, control-system upgrades, improved reliability and modest capacity or quality improvements where technically feasible.

Capacity Expansion

Capacity of an existing line can often be increased by addressing bottlenecks, upgrading key machines, improving packaging speed, optimizing layout or introducing selective automation.

Industrial Automation

Typical applications include PLC sequence control, temperature/pressure/level loops, automatic dosing, HMI, data logging and optional SCADA integration.

Supply Chain

Factory = Machinery + Raw Materials + Utilities + People + Process + Supply Chain + Market. The Supply Chain Department supports supplier sourcing, procurement, logistics and ongoing material supply for eye shadow and blush (powder) projects.

Packaging

Filling, sealing, labeling, coding, cartoning, shrink wrapping and palletizing are integrated according to product format and market requirements.

Branding & Product Development

When required, support can be provided for product development, packaging design, graphic design, industrial design, branding and related marketing preparation.

Market & Country Sections

Engineering, machinery, installation, overhaul and supply-chain support are available for eye shadow and blush (powder) projects in Iran, Iraq, Kurdistan Region (Erbil, Sulaymaniyah, Duhok), Baghdad, Basra, Mosul, Afghanistan (Kabul, Herat, Mazar-e-Sharif), Uzbekistan, Turkmenistan, Tajikistan, Syria, Oman, Jordan, Turkey, Armenia and Georgia.

Sahi Rasa Services

Service	Application in This Project
Feasibility Study	Technical and economic assessment of capacity, product mix and investment
Factory Design	Layout, process flow and utility design
Machinery Design / Manufacturing	Specification and coordinated supply or manufacturing of process equipment
Procurement	Sourcing of machinery, components and materials
Installation & Commissioning	Mechanical/electrical installation, start-up and performance testing
Automation	PLC, HMI, process control and optional SCADA
Raw Material Supply	Coordination via Supply Chain Department
Repair / Overhaul / Refurbishment	Restoration and modernization of existing machinery
Capacity Expansion	Engineering and implementation of throughput increases
Staff Training	Operational and basic maintenance training

Why Sahi Rasa

Process engineering, machinery-related capabilities, procurement support, supply-chain coordination, installation, commissioning, training, maintenance support and automation are combined. The practical advantage is a more integrated execution path from concept to an operating production line.

From Empty Land to Production

Typical sequence: Feasibility → Engineering → Factory Design → Equipment Design → Machinery Manufacturing/Procurement → Logistics → Installation → Commissioning → Staff Training → Raw Material Supply → Trial Production → Commercial Production. Operational support for a defined initial period can be examined as a contractual option.

Who Should Contact Sahi Rasa?

Investors – planning a new eye shadow and blush (powder) factory or production line
Existing Factory Owners – needing repair, overhaul, refurbishment, modernization, automation or capacity expansion
Industrial Buyers – requiring machinery, spare parts, raw materials or engineering services

Final CTA

If you intend to set up a eye shadow and blush (powder) production line or factory, if your existing plant needs repair, overhaul or capacity expansion, if you require new machinery or automation, or if you need coordination of raw-material supply, contact the Industrial Department.

Submit your request for: Factory Setup / Machinery / Repair / Overhaul / Refurbishment / Automation / Capacity Expansion / Raw Materials.

Registering an order for raw materials for the factory Eye Shadow and Blush (Powder)

FAQ

What is the typical cost of setting up a eye shadow and blush (powder) factory?
Cost depends on capacity, product range, automation level, building and utility scope. A detailed estimate is prepared after process definition.
Which main machines are required?
Powder mixer with stainless-steel blades and variable speed, micronizing mill, hydraulic press for powder compaction, dryer, packaging machine
What production capacity can be designed?
Capacity is determined during the engineering phase according to market demand and investment criteria.
How much space is needed?
Subject to final layout and capacity.
What are the main raw materials?
Talc, mica, pigments, binders, silicone, preservatives, oils, water, packaging materials, pans
Can raw materials be supplied?
Yes, via the Supply Chain Department according to project scope.
Is machinery manufacturing or procurement supported?
Design, manufacturing or coordinated procurement according to the agreed scope.
Can existing machines be repaired?
Yes – inspection, troubleshooting, mechanical/electrical repair and spare parts.
Is overhaul or refurbishment possible?
Yes – comprehensive restoration and control upgrades.
Can capacity of an existing line be increased?
Often yes, by addressing bottlenecks and upgrading key equipment.
Are turnkey projects executed?
Turnkey or partial turnkey scopes can be offered under defined contracts.
Are services available in Iraq and Kurdistan Region?
Yes, including Erbil, Sulaymaniyah, Duhok and other locations.
Are services available in Afghanistan?
Yes, including Kabul, Herat and Mazar-e-Sharif.
Can raw materials be supplied from Iran for regional projects?
Yes, coordination of material supply is part of possible supply-chain scope.
Is installation and commissioning included?
They can be included according to the selected contractual package.