Lipstick (Solid and Liquid) Production Line and Factory Setup

A lipstick (solid and liquid) production line is a complete industrial system designed to produce high-quality lipstick (solid and liquid) under controlled hygienic and process conditions. The line is engineered for consistent product quality, operational reliability and compliance with cosmetic industry standards.

From an industrial perspective, lipstick (solid and liquid) manufacturing combines precise emulsion technology, pigment dispersion and filling systems to achieve the required texture, stability and sensory attributes. The process relies on a defined sequence of unit operations that must be correctly engineered, sized and integrated.

The Industrial Department supports investors who want to establish a new lipstick (solid and liquid) factory as well as existing plant owners who need repair, overhaul, capacity expansion or automation of their current lines. Projects can start from an empty site or from an operating facility that requires technical upgrading.

Whether the goal is a green-field turnkey plant in Iraq, Kurdistan Region, Afghanistan or other regional markets, or the modernization of an existing line in Iran, engineering, machinery supply or manufacturing, installation, commissioning and ongoing technical support can be provided under defined contractual scopes.

Production Line Overview

The lipstick (solid and liquid) production line is engineered as an integrated process system covering phase preparation, emulsification or melting, homogenization, filling and packaging. Design capacity is determined during the engineering phase and can typically range according to market requirements and selected equipment sizing.

Main process flow: Melting of waxes and oils (70-85°C) → Pigment addition with three-roll mill → Homogenization → Hot-fill molding → Cooling → Demolding → Assembly → Packaging

Main machinery groups: Melting kettle 50-200 L, vacuum mixer 50-200 L, three-roll mill for pigment dispersion, filling machine 1000-5000 pieces/hour, cooling tunnel 5-10 m. Supporting infrastructure covers electrical power, process water, steam, compressed air, vacuum systems and wastewater handling where applicable.

Manpower requirements depend on the degree of automation. Quality control covers incoming raw materials, process parameters and finished-product specifications.

Technical Specifications

The following technical data represent typical ranges for an industrial lipstick (solid and liquid) production line. Final values are defined during basic and detailed engineering and may vary according to selected technology, level of automation, product portfolio and factory layout. For precise project-specific figures, contact the Industrial Department.

Specification	Description
Product	Lipstick (Solid and Liquid)
Production Capacity	Depending on project capacity and selected equipment sizing (to be determined during engineering phase)
Required Area	Subject to final layout and capacity
Electrical Power	380 V three-phase (depending on equipment selection and automation level)
Main Machines	Melting kettle 50-200 L, vacuum mixer 50-200 L, three-roll mill for pigment dispersion, filling machine 1000-5000 pieces/hour, cooling tunnel 5-10 m
Utilities	Required area 200-500 m². Power 30-80 kW. Water 2-5 m³/day. Manpower 5-12 per shift. Capacity 10,000-50,000 pieces/day.

All figures are indicative. Detailed utility balances, equipment lists and layout drawings are prepared after process definition and capacity confirmation.

Products

An industrial lipstick (solid and liquid) production line can manufacture a variety of finished products depending on the selected formulation, process technology and packaging system. Variant development is defined during product development and process engineering. Packaging formats are selected according to target markets and distribution channels.

Raw Materials for Lipstick (Solid and Liquid) Factory

Raw material selection and quality control are critical for product quality, stability and sensory performance. The main materials used are: Carnauba wax, candelilla wax, beeswax, vegetable oils, pigments, vanilla, vitamin E, antioxidants, fragrance, lipstick cases

Each material has a defined role and a measurable impact on quality attributes. Storage and handling conditions must be controlled to preserve functional properties.

Sahi Rasa For Factories raw material

The Supply Chain Department is prepared to support identification, evaluation and supply of the main and auxiliary raw materials required by lipstick (solid and liquid) factories. Depending on the contractual scope, services may include supplier identification and evaluation, procurement and purchase coordination, specification control, logistics coordination, supply-chain design for continuous production, ongoing supply arrangements, and supply of materials from Iran for projects located in regional markets.

Registering an order for raw materials for the factory Lipstick (Solid and Liquid)
Sahi Rasa Supply Chain Department

Raw-material supply chain support can be examined for industrial projects located in Iran, Iraq, the Kurdistan Region of Iraq (including Erbil, Sulaymaniyah, Duhok), Baghdad, Basra, Mosul, Afghanistan (Kabul, Herat, Mazar-e-Sharif), Uzbekistan, Turkmenistan, Tajikistan, Syria, Oman, Jordan, Turkey, Armenia and Georgia.

Manufacturing Process

The process begins with melting of carnauba wax, candelilla wax, beeswax and vegetable oils in a jacketed stainless-steel kettle at 70-85°C. Powder pigments are dispersed in oil using a three-roll mill and added to the melt. The mixture is homogenized. Hot melt is poured into silicone or metal molds (hot-fill). Molds pass through a cooling tunnel to solidify the lipstick. Solid sticks are demolded, assembled into mechanisms, flame-polished for a smooth glossy surface and packaged.

The overall process follows the sequence: Melting of waxes and oils (70-85°C) → Pigment addition with three-roll mill → Homogenization → Hot-fill molding → Cooling → Demolding → Assembly → Packaging

Each stage has a clear purpose, input materials, equipment and quality impact. Detailed process parameters are defined during the engineering phase according to product formulation and capacity.

Machinery & Equipment

Each main machine performs a specific function. Support is available for design, manufacturing or procurement, customization, installation, commissioning, repair, overhaul, refurbishment, automation and spare-parts supply according to the agreed project scope.

Main equipment includes: Melting kettle 50-200 L, vacuum mixer 50-200 L, three-roll mill for pigment dispersion, filling machine 1000-5000 pieces/hour, cooling tunnel 5-10 m.

For every main machine the following aspects are covered: Function, Working Principle, Position in line, Importance, Product Quality Impact, Maintenance needs, and Sahi Rasa Support (Design, Manufacturing, Procurement, Installation, Commissioning, Repair, Overhaul, Refurbishment, Automation, Spare Parts).

Factory Layout & Building Requirements

Typical functional areas include raw-material receiving and storage, phase preparation, emulsification or melting, filling and packaging, quality-control laboratory, utility rooms, maintenance workshop, staff facilities, loading docks and administrative offices. Layout must respect hygienic zoning and process flow. Exact area allocation is determined during the engineering phase according to capacity and product range.

Utilities

Required area 200-500 m². Power 30-80 kW. Water 2-5 m³/day. Manpower 5-12 per shift. Capacity 10,000-50,000 pieces/day.

Electricity: 380 V three-phase
Process water, steam, compressed air, vacuum systems as required
HVAC and drainage according to hygiene and local regulations

Turnkey Factory Setup

An investor can start from an empty site. Depending on contractual scope, the project can be accompanied through: Idea → Feasibility → Engineering → Factory Design → Machinery → Procurement → Manufacturing → Installation → Commissioning → Training → Raw Material Supply → Packaging → Trial Production → Commercial Production. The objective is an operational factory ready for production.

EPC & PMC

Projects can be executed under EPC (Engineering, Procurement, Construction) or PMC (Project Management Consultancy) approaches. Engineering, machinery supply or manufacturing, installation supervision and commissioning are coordinated within the defined contract boundaries.

Machinery Repair

Existing factories can request inspection, troubleshooting, mechanical and electrical repair, component replacement, spare-parts supply and line maintenance support for the main process equipment.

Machinery Overhaul & Refurbishment

Older equipment can be evaluated for comprehensive overhaul, replacement of worn parts, control-system upgrades, improved reliability and modest capacity or quality improvements where technically feasible.

Capacity Expansion

Capacity of an existing line can often be increased by addressing bottlenecks, upgrading key machines, improving packaging speed, optimizing layout or introducing selective automation.

Industrial Automation

Typical applications include PLC sequence control, temperature/pressure/vacuum/level loops, automatic dosing, HMI, data logging and optional SCADA integration.

Supply Chain

Factory = Machinery + Raw Materials + Utilities + People + Process + Supply Chain + Market. The Supply Chain Department supports supplier sourcing, procurement, logistics and ongoing material supply for lipstick (solid and liquid) projects.

Packaging

Filling, sealing, labeling, coding, cartoning, shrink wrapping and palletizing are integrated according to product format and market requirements.

Branding & Product Development

When required, support can be provided for product development, packaging design, graphic design, industrial design, branding and related marketing preparation.

Market & Country Sections

Engineering, machinery, installation, overhaul and supply-chain support are available for lipstick (solid and liquid) projects in Iran, Iraq, Kurdistan Region (Erbil, Sulaymaniyah, Duhok), Baghdad, Basra, Mosul, Afghanistan (Kabul, Herat, Mazar-e-Sharif), Uzbekistan, Turkmenistan, Tajikistan, Syria, Oman, Jordan, Turkey, Armenia and Georgia.

Sahi Rasa Services

Service	Application in This Project
Feasibility Study	Technical and economic assessment of capacity, product mix and investment
Factory Design	Layout, process flow and utility design
Machinery Design / Manufacturing	Specification and coordinated supply or manufacturing of process equipment
Procurement	Sourcing of machinery, components and materials
Installation & Commissioning	Mechanical/electrical installation, start-up and performance testing
Automation	PLC, HMI, process control and optional SCADA
Raw Material Supply	Coordination via Supply Chain Department
Repair / Overhaul / Refurbishment	Restoration and modernization of existing machinery
Capacity Expansion	Engineering and implementation of throughput increases
Staff Training	Operational and basic maintenance training

Why Sahi Rasa

Process engineering, machinery-related capabilities, procurement support, supply-chain coordination, installation, commissioning, training, maintenance support and automation are combined. The practical advantage is a more integrated execution path from concept to an operating production line.

From Empty Land to Production

Typical sequence: Feasibility → Engineering → Factory Design → Equipment Design → Machinery Manufacturing/Procurement → Logistics → Installation → Commissioning → Staff Training → Raw Material Supply → Trial Production → Commercial Production. Operational support for a defined initial period can be examined as a contractual option.

Who Should Contact Sahi Rasa?

Investors – planning a new lipstick (solid and liquid) factory or production line
Existing Factory Owners – needing repair, overhaul, refurbishment, modernization, automation or capacity expansion
Industrial Buyers – requiring machinery, spare parts, raw materials or engineering services

Final CTA

If you intend to set up a lipstick (solid and liquid) production line or factory, if your existing plant needs repair, overhaul or capacity expansion, if you require new machinery or automation, or if you need coordination of raw-material supply, contact the Industrial Department.

Submit your request for: Factory Setup / Machinery / Repair / Overhaul / Refurbishment / Automation / Capacity Expansion / Raw Materials.

Registering an order for raw materials for the factory Lipstick (Solid and Liquid)

FAQ

What is the typical cost of setting up a lipstick (solid and liquid) factory?
Cost depends on capacity, product range, automation level, building and utility scope. A detailed estimate is prepared after process definition.
Which main machines are required?
Melting kettle 50-200 L, vacuum mixer 50-200 L, three-roll mill for pigment dispersion, filling machine 1000-5000 pieces/hour, cooling tunnel 5-10 m
What production capacity can be designed?
Capacity is determined during the engineering phase according to market demand and investment criteria.
How much space is needed?
Subject to final layout and capacity.
What are the main raw materials?
Carnauba wax, candelilla wax, beeswax, vegetable oils, pigments, vanilla, vitamin E, antioxidants, fragrance, lipstick cases
Can raw materials be supplied?
Yes, via the Supply Chain Department according to project scope.
Is machinery manufacturing or procurement supported?
Design, manufacturing or coordinated procurement according to the agreed scope.
Can existing machines be repaired?
Yes – inspection, troubleshooting, mechanical/electrical repair and spare parts.
Is overhaul or refurbishment possible?
Yes – comprehensive restoration and control upgrades.
Can capacity of an existing line be increased?
Often yes, by addressing bottlenecks and upgrading key equipment.
Are turnkey projects executed?
Turnkey or partial turnkey scopes can be offered under defined contracts.
Are services available in Iraq and Kurdistan Region?
Yes, including Erbil, Sulaymaniyah, Duhok and other locations.
Are services available in Afghanistan?
Yes, including Kabul, Herat and Mazar-e-Sharif.
Can raw materials be supplied from Iran for regional projects?
Yes, coordination of material supply is part of possible supply-chain scope.
Is installation and commissioning included?
They can be included according to the selected contractual package.